• Email Us
    habby@ht-refractory.com
  • Mob/WhatsApp
    +86 17886663539
  • Silica Fire Brick KD for coke oven

Silica Fire Brick KD for coke oven

Catalog: silica brick | 2022-01-24

Silica refractorychecker brick for coke oven,Silica brick refractories are acidic, with good acid resistance capacity slag erosion, load softening temperature up to 1640 ~ 1670 ℃, long-term use at high volume relatively stable.

Product Details

65.webp.jpg

Silica brick for coke oven


Adopting advanced production technology and organizing production according to the Department standard, our coke oven brick has been used in many coking plants in Shanxi, Hebei and other places.
Product Parameters
project
Hearth Bottom
 Furnace Wall
Others
SiO2 (%) ≥
94
Load softening Start temperature(%) ≥
1650(1620)Cementing Silica
Reheating linear change rate(%)1450℃*2h
+0.2—0
Apparent porosity(%)≤
22(23)
24
Compressive Strength Mpa ≥
30
25
True Density g/cm3 ≤
2.34
2.35
Thermal Expansion Rate % 1000℃ ≤
1.25
1.30
Product Details Show

Property:

1. High load softening temperature

2. High thermal conductivity

3. Good thermal shock resistance.

4. High temperature volume stability.



Silica bricks for hot-blast stove

Silica refractory products, which are used as the main crystalline phase of the high temperature part of the blast furnace for masonry.


Property of  Silica bricks for hot-blast stove


1. Under the condition of long-term high temperature and load, the volume is stable, the high temperature creep rate is low, and one or even two BF service can be used continuously.

2.600℃ above have good thermal shock resistance. Adapt to the variability of temperature of hot-blast stove, keep the bricks and masonry intact;

3. The resistance to chemical erosion is better than that of clay bricks and general high alumina bricks. The alkaline substance in the gas and soot is only limited to the surface forming a glass phase, and does not peel off the silicon brick.

4. The thermal conductivity of silica bricks is larger than that of clay bricks and high alumina bricks, which facilitates the storage and release of heat in a relatively short time.



Parameter of Silica bricks for hot-blast stove

Project
Index
Dome furnace brick
Lattice Bricks
SiO2 (%) ≥
95
Cold Crushing Strength(Mpa) ≥
35
30
Apparent porosity(%)≤
22
23
Creep Rate(0.2MPa,1500℃,50h)≤
0.8
True Density g/cm3 ≤
2.35
Thermal expansion rate(1000℃)% ≤
1.26
Residual quartz %
Provide data