Analysis on the corrosion mechanism of magnesia-zirconium bricks used in glass kiln regeneratorsMost of the domestic glass kiln regenerators use three-layer magnesia-zirconium checker bricks for the upper part. The bricks are fired in ultra-high temperature tunnel kilns. They are··· ...

Configuration of refractory materials at the bottom of glass melting furnaceThis part of the glass melting furnace bottom is only corroded by the liquid phase, and is not corroded by the glass liquid level and the three-phase interface. Only when the molten glass reaches the unde··· ...

Six types of refractory materials commonly used in foreign glass kilnsRefractory materials used in foreign glass kilns mainly fall into the following six categories:1.AZS and high zirconia bricksThe main production process for fused AZS bricks is to improve their corrosion resist··· ...

Development of clay bricks and AZS bricks for glass kilnsSintered aluminum silicon materialLarge clay bricks are used to build the bottom of the kiln tank and the tin bath. The tin bath has high requirements for refractory materials. The first generation of tin bath materials are··· ...

Selection of refractory bricks for clarification part of glass kilnThe temperature of the clarification part of the glass kiln is much lower than that of the melting part. Therefore, the erosion rate of the refractory bricks in this part is also much lower, so the selection of re··· ...

What is zirconia brick?Zirconia bricks are refractory products produced with zirconia as the main raw material. There are two main manufacturing methods: firing method and melting and casting method. There are two crystal forms of zirconia: monoclinic, tetragonal and cubic. When ··· ...